The Jetson TX2 is an embedded system-on-module (SOM) developed by NVIDIA.
The seL4 kernel has a limited port to the TX2 which supports the SoM only in 64-bit mode. SMP, SMMU, Hyp-mode, etc are not supported by the current port.
Checkout the sel4test project using repo as per seL4Test
repo init -u https://github.com/seL4/sel4test-manifest.git repo sync mkdir cbuild cd cbuild ../init-build.sh -DPLATFORM=tx2 -DAARCH64=1 # The default cmake wrapper sets up a default configuration for the target platform. # To change individual settings, run `ccmake` and change the configuration # parameters to suit your needs. ninja
Generated binaries can be found in the
Booting via PXE
A U-Boot uImage will be created by the seL4 build system. This can be booted by U-Boot using PXE.